Readers ask: How To Shorten Your Golf Clubs?

Readers ask: How To Shorten Your Golf Clubs?

How much does it cost to shorten golf clubs?

Shorten Club Price of new grip
Shorten Club (save grip) $12.00
Reshaft (Steel or Graphite) $15.00 plus price of shaft
Reshaft (Bore Through) $25.00 plus price of shaft


Can I shorten my golf clubs myself?

Shortening the shaft can make the golf club less flexible. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.

How long should golf clubs be for my height?

Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.

You might be interested:  FAQ: What Kind Of Clubs Do You Need Golf?

Is it bad to shorten golf clubs?

“They will be too heavy, too stiff, the wrong loft, the wrong lie and probably, the wrong length,” said Wishon in his book 12 Myths That Could Wreck Your Golf Game. In short, cutting down a club leaves less shaft to offset the weight of the club.

Is it OK to choke up on golf club?

Having better control of the club makes it easier to hit the sweet spot, negating the small loss in clubhead speed. Choking up on iron shots can boost your greens-in-regulation percentage (GIR) – a great way to lower your scores. You’ll make better contact, of course, and your misses won’t sail as far off line.

Should I choke down on my driver?

Choking down on your driver is also a good method when you need to play a tee shot into the wind. The speed of your swing will be reduced when you choke down, which means your spin rate should be reduced as well.

Should I shorten my irons?

A shorter club technically should improve control and accuracy. A longer club technically should increase distance. A club that is properly fitted in terms of the length of the shaft will maximize accuracy and distance.

Should I shorten my putter?

Benefits of Shortening a Golf Putter Shaft You want to decrease the head weight because, the shorter your putter is, the more the head weight decreases. You get better control over your putter and also improve the contact that the putter makes with the golf ball.

Should I shorten my 3 wood?

It will play flatter so your contact should move slightly towards the toe side by shortening the club (though that’s not guaranteed either). So, theoretically, if your misses were slightly on the heel side, shortening the club could move your impact closer to the center of the face.

You might be interested:  Often asked: How Many Golf Clubs Are In Texas?

Does height matter for golf clubs?

It doesn’t matter how tall you are if you have a deeper crouch in your swing because your wrists will then be closer to the ground, which means you need slightly shorter clubs. Arm length and wrist to floor length are what truly determines how long the shaft of your golf clubs should be.

Is custom fitting golf clubs worth it?

And the answer is absolutely yes, it’s worth getting fit for clubs you already have. Especially if you’re 5-foot-5, since a stock set of clubs isn’t likely to have the proper lie angle for you. If that sounds like you, clubs that once were fitted to you might not be now.

Is it worth getting fitted for golf clubs?

Many amateur golfers of varying skill levels stunt the improvement of their games by believing they’re “not good enough” to get a club fitting. They say that once their golf game starts to improve they’ll invest in a professional fitting, but it’s not worth it yet.

Are expensive golf clubs worth it?

Are expensive clubs worth it for beginners? Probably not, no, as your golf skills will be constantly improving and you probably won’t have these clubs for very long. You will outgrow them and need a new set after only a couple of years so there is no real need to splurge as a beginner.

Should I use shorter golf clubs?

Most of the time, a golfer who is tall, or has short arms, or both, will make better contact with an over-length club. The same would be true for a shorter golfer using an under-length club. Sometimes a golfer’s height and arm length will negate each other and a standard length is the best option.

You might be interested:  Often asked: Why Only 14 Clubs In A Golf Bag?

Can you shorten graphite golf shafts?

Trimming Shafts to Improve Accuracy: Cut from Grip End Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft.

Leave a Reply

Your email address will not be published. Required fields are marked *