Readers ask: How To Shorten Golf Clubs?

Readers ask: How To Shorten Golf Clubs?

Can I shorten my golf clubs myself?

Shortening the shaft can make the golf club less flexible. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.

How much does it cost to shorten golf clubs?

Shorten Club Price of new grip
Shorten Club (save grip) $12.00
Reshaft (Steel or Graphite) $15.00 plus price of shaft
Reshaft (Bore Through) $25.00 plus price of shaft


Can you change the length of golf clubs?

Lengthen a Club Use the same material from which the shaft is made — use a graphite extension piece for a graphite shaft, for example. You can buy extension pieces or cut one yourself from an old shaft, using the same cutting techniques that you did for trimming a shaft from the butt end.

You might be interested:  FAQ: How To Fit Golf Clubs For Length?

Should I shorten my irons?

A shorter club technically should improve control and accuracy. A longer club technically should increase distance. A club that is properly fitted in terms of the length of the shaft will maximize accuracy and distance.

Is it OK to choke up on golf club?

Having better control of the club makes it easier to hit the sweet spot, negating the small loss in clubhead speed. Choking up on iron shots can boost your greens-in-regulation percentage (GIR) – a great way to lower your scores. You’ll make better contact, of course, and your misses won’t sail as far off line.

Should I choke down on my driver?

Choking down on your driver is also a good method when you need to play a tee shot into the wind. The speed of your swing will be reduced when you choke down, which means your spin rate should be reduced as well.

Should I cut down my golf clubs?

“They will be too heavy, too stiff, the wrong loft, the wrong lie and probably, the wrong length,” said Wishon in his book 12 Myths That Could Wreck Your Golf Game. In short, cutting down a club leaves less shaft to offset the weight of the club. First, clubs should normally be cut from the butt (or grip) end.

Do shorter golfers need shorter clubs?

Shorter golfers are often better served with shorter clubs, while the lie angle (how the club sits on the ground) may also need tweaking. If your clubs are too long and/or upright, you’ll be forced to adjust away from a swing that’s natural for you.

You might be interested:  FAQ: What Is The Name For The Fake Hickory Stick Golf Clubs?

Is custom fitting golf clubs worth it?

And the answer is absolutely yes, it’s worth getting fit for clubs you already have. Especially if you’re 5-foot-5, since a stock set of clubs isn’t likely to have the proper lie angle for you. If that sounds like you, clubs that once were fitted to you might not be now.

Does golf club length matter?

When it comes to golf clubs, size does matter. While correct golf club size can help you become a better golfer and make the game more enjoyable, inaccurate club length will have the exact opposite effect.

How long should my golf clubs be for my height?

Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.

Does shortening a golf club change the lie angle?

The lie angle will automatically change if clubs are lengthened. Er, no it won’t. Cutting length from or adding length to a shaft will not alter the angle between the hosel and the sole. What it will affect is the “effective lie “.

Should I shorten my putter?

Benefits of Shortening a Golf Putter Shaft You want to decrease the head weight because, the shorter your putter is, the more the head weight decreases. You get better control over your putter and also improve the contact that the putter makes with the golf ball.

Can you cut down graphite shafts?

Graphite shafts need special care to be cut properly. Yes, it is even strong enough to cut steel. It can cut through a graphite shaft in 15-20 seconds after the shaft has been securely place in your vise.

Leave a Reply

Your email address will not be published. Required fields are marked *