Often asked: How To Cut Golf Clubs?

Often asked: How To Cut Golf Clubs?

Can I shorten my golf clubs myself?

Shortening the shaft can make the golf club less flexible. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.

How much does it cost to cut golf clubs?

Shorten Club Price of new grip
Shorten Club (save grip) $12.00
Reshaft (Steel or Graphite) $15.00 plus price of shaft
Reshaft (Bore Through) $25.00 plus price of shaft


Which end of a golf shaft do you cut?

The butt end of the shaft is grip end. If you are shortening or extending the length of a golf club, this is where you will cut. If you want to change the play-ability of the club (feel, flex to a certain extent, spin rate, dispersion), you will be cutting the tip end of the shaft.

You might be interested:  FAQ: Where Can I Buy Cheap Golf Clubs?

Should I shorten golf clubs?

First, clubs should normally be cut from the butt (or grip) end. Then weight (lead tape or other method) should be added to the clubhead to counterbalance the reduction on the grip end. This is especially critical in putters, where feel is all-important.

Is it OK to choke up on golf club?

Having better control of the club makes it easier to hit the sweet spot, negating the small loss in clubhead speed. Choking up on iron shots can boost your greens-in-regulation percentage (GIR) – a great way to lower your scores. You’ll make better contact, of course, and your misses won’t sail as far off line.

Can you cut golf shafts?

Trimming Shafts to Improve Accuracy: Cut from Grip End Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft.

Are golf clubs too long?

Signs Your Clubs are Too Long You’re unable to move your lower body using proper swinging mechanics. The ball often flies off to the left and too high. The club’s shaft feels very weak. You’re constantly hitting the ball with the toe of the golf club.

What happens if you shorten your driver shaft?

Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.

You might be interested:  Quick Answer: Golf Clubs Bent When Fitting?

What is the correct grip for a golf club?

The grip of the golf club should sit diagonally across your fingers into the palm of your left hand. When you close your left hand, you should be able to see the knuckles of your left index and middle fingers.

How often should I Regrip my golf clubs?

How often to re-grip Golf Clubs as a rule of thumb, you should regrip once every year or every 40 rounds. Regardless of how often you play, ozone, heat, dirt and oils are constantly at work breaking down the materials that make up your grips.

Where can I Reshaft my golf clubs?

When it comes time to reshaft your clubs, you might be inclined to do it yourself. But if you’re unfamiliar with the process, you can visit the Golf Services PROS at your local DICK’S Sporting Goods to get help with the repair. Their Certified Fitters can match you with a new shaft that best complements your game.

Does shortening a golf club change the lie angle?

The lie angle will automatically change if clubs are lengthened. Er, no it won’t. Cutting length from or adding length to a shaft will not alter the angle between the hosel and the sole. What it will affect is the “effective lie “.

Can you cut graphite golf shafts?

Graphite shafts need special care to be cut properly. Yes, it is even strong enough to cut steel. It can cut through a graphite shaft in 15-20 seconds after the shaft has been securely place in your vise.

You might be interested:  What Clubs Are In A Complete Golf Set?

How long should my driver be for my height?


Height Wrist to Floor Suggested Driver
5’6″ to 5’7″ 32.00″ to 37.00″ 43.5″
5’7″ to 5’9″ 34.00″ to 39.00″ 44.0″
5’8″ to 5’11” 35.25″ to 40.25″ 44.5″
5’9″ to 6’0″ 36.50″ to 41.25″ 45.0″


Leave a Reply

Your email address will not be published. Required fields are marked *