FAQ: How To Extend Golf Clubs?

FAQ: How To Extend Golf Clubs?

Can I lengthen my golf clubs?

There are two ways to lengthen your shafts. You may add extenders to your existing shafts or you may replace your existing shafts with longer ones. The effects can be very different. Tom Wishon has written extensively about the effects of changing shafts in “The Golfsmith Practical Clubfitting Program” guide.

How much does it cost to extend golf clubs?

Back to your question if you just want to lengthen your clubs Golfsmith charges $20 a club to reshaft (not including cost of shaft) and $8 to lengthen the shaft (+ cost of grip).

Do Golf Club extensions work?

The Universal Shaft extensions will work with almost any steel or graphite shaft. After applying a little epoxy, insert the extension into a shaft, force the provided tapered plug into the extension until the extension expands to fit the ID of the golf shaft.

How far should you hit a 7 iron?

How to Know Which Golf Club to Use

You might be interested:  How To Register My Ping Golf Clubs?
Club Men’s Average Distance Women’s Average Distance
4- iron 170 yards 150 yards (consider a hybrid, instead)
5- iron 160 yards 140 yards
6- iron 150 yards 130 yards
7 – iron 140 yards 120 yards


How far does Tiger Woods hit a 7 iron?

Tiger Woods Can Hit A 7 Iron A Long Way, But How Far Can He Hit It? Ans: Tiger drives his driver an average of 285 yards with carrying. His long irons (two to four iron ) cover a distance of 250 to 200 yards. The distance of his middle irons (5, 6, 7 ) is 208 to 172 yards.

How long should I extend my golf clubs?

Six feet to six feet, three inches-add half an inch to the standard length of the club. Five feet, ten inches to six feet, two inches-add half an inch to the standard length of the club. Five feet, nine inches to five feet- The standard length of the club should work fine.

How much length can you add to a golf club?

Altering the Club Length Club length can be altered up to one inch longer or shorter.

Does lengthening a golf club change the lie angle?

The lie angle will automatically change if clubs are lengthened. Only slightly but it will change.

What is standard club length?

Even though the Rules of Golf for competition allow the club shaft length of up to 48 inches, Golf Monthly notes that the average driver length used on the tour is ‘only’ 44.5 inches, while the average driver length in golf shops is about 45.5 inches.

You might be interested:  Quick Answer: Which Of The Following Golf Clubs Is This?

What kind of epoxy do you use on golf clubs?

The Best Type of Epoxy to Use for Golf Clubs You can use two types of two-component epoxies for bonding golf clubs. They are quick cure- epoxy and long-cure epoxy. The time taken for curing depends on the kind of epoxy used and the temperature in which it is used.

How do you remove a golf shaft extension?

Pliers, a vice and heat should be enough. Depending how the extensions are made. If they are epoxy glued, apply heat until epoxy breaks out and pull off the extensions. If something else, you could just hacksaw them and then remove rest of them with pliers or something like that.

What length driver do I need?

Remember, the average driver standard length is 45 inches for men and 44 inches for women (off the rack). With a shorter shaft can help with the right clubhead, you can make magic off the tee and start to shoot consistently lower scores.

How do you measure golf clubs chart?

To get an accurate measurement of club length. Measure the club at the angle that the bottom of the clubhead lies in its playing position on the floor. Measure from the floor to the end of the Grip. Before we use the chart below, it is important to know your height and your wrist-to-floor measurement.

Leave a Reply

Your email address will not be published. Required fields are marked *